{"id":4447984779335,"title":"Hanna Instruments General Purpose Cleaning Solution 500 mL HI7061L","handle":"hanna-instruments-general-purpose-cleaning-solution-500-ml-hi7061l","description":"\u003cspan style=\"font-weight: 400;\"\u003eHI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.\u003c\/span\u003e\u003cbr style=\"font-weight: 400;\"\u003e\u003cbr style=\"font-weight: 400;\"\u003e\n\u003cul style=\"font-weight: 400;\"\u003e\n\u003cli\u003eSpecially formulated for cleaning electrodes\u003c\/li\u003e\n\u003cli\u003eAir tight seal to ensure quality\u003c\/li\u003e\n\u003cli\u003eExpiration date and lot number\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-weight: 400;\"\u003eDetails\u003c\/h2\u003e\n\u003cp\u003eThe most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1129\/3552\/files\/electrode-cleaning-illustration_600x600.gif?v=1579677589\" alt=\"\"\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eCleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.  \u003c\/p\u003e\n\u003cp\u003eAir tight bottle with tamper-proof seal\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures quality and freshness of solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach bottle marked with lot number and expiration date.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHanna offers a complete line of cleaning solutions engineered for specific applications.\u003c\/p\u003e","published_at":"2020-01-22T15:18:00+08:00","created_at":"2020-01-22T15:20:20+08:00","vendor":"Hanna","type":"Meters \u0026 Buffer Solutions","tags":["Type_Buffer Solution"],"price":8500,"price_min":8500,"price_max":8500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31685444534343,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Hanna Instruments General Purpose Cleaning Solution 500 mL HI7061L","public_title":null,"options":["Default Title"],"price":8500,"weight":600,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cityfarm.my\/cdn\/shop\/products\/genral-purpose-cleaning-solution-hi7061L_box__53170.1569952181.1280.1280.jpg?v=1579792891"],"featured_image":"\/\/cityfarm.my\/cdn\/shop\/products\/genral-purpose-cleaning-solution-hi7061L_box__53170.1569952181.1280.1280.jpg?v=1579792891","options":["Title"],"media":[{"alt":"Hanna Instruments General Purpose Cleaning Solution 500 mL HI7061L - CityFarm","id":6216411250759,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/cityfarm.my\/cdn\/shop\/products\/genral-purpose-cleaning-solution-hi7061L_box__53170.1569952181.1280.1280.jpg?v=1579792891"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/cityfarm.my\/cdn\/shop\/products\/genral-purpose-cleaning-solution-hi7061L_box__53170.1569952181.1280.1280.jpg?v=1579792891","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cspan style=\"font-weight: 400;\"\u003eHI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.\u003c\/span\u003e\u003cbr style=\"font-weight: 400;\"\u003e\u003cbr style=\"font-weight: 400;\"\u003e\n\u003cul style=\"font-weight: 400;\"\u003e\n\u003cli\u003eSpecially formulated for cleaning electrodes\u003c\/li\u003e\n\u003cli\u003eAir tight seal to ensure quality\u003c\/li\u003e\n\u003cli\u003eExpiration date and lot number\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-weight: 400;\"\u003eDetails\u003c\/h2\u003e\n\u003cp\u003eThe most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1129\/3552\/files\/electrode-cleaning-illustration_600x600.gif?v=1579677589\" alt=\"\"\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eCleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.  \u003c\/p\u003e\n\u003cp\u003eAir tight bottle with tamper-proof seal\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures quality and freshness of solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach bottle marked with lot number and expiration date.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHanna offers a complete line of cleaning solutions engineered for specific applications.\u003c\/p\u003e"}

Hanna Instruments General Purpose Cleaning Solution 500 mL HI7061L

Product Description
HI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.

  • Specially formulated for cleaning electrodes
  • Air tight seal to ensure quality
  • Expiration date and lot number

Details

The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.


 

Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI7061L cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.  

Air tight bottle with tamper-proof seal

  • Ensures quality and freshness of solution

Each bottle marked with lot number and expiration date.

  • Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.

Hanna offers a complete line of cleaning solutions engineered for specific applications.

RM85.00
Maximum quantity available reached.