{"id":7045830607039,"title":"Hanna Instruments General Purpose Cleaning Solution 20 mL Sachet - HI700601P","handle":"hanna-instruments-general-purpose-cleaning-solution-20-ml-sachet-hi700601p","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe HI700601P is a highly effective cleaning solution that is formulated for pH electrodes that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna's cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpecially formulated for cleaning electrodes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConvenient, one-time use sachets ensure freshness of solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-controller=\"quantity\"\u003e \u003c\/p\u003e\n\u003cp data-controller=\"quantity\"\u003eThe most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.\u003c\/p\u003e\n\u003cp\u003eThe Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it’s designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI700601P is a cleaning solution made to clean pH electrodes used in a variety of applications.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"font-weight: 600;\"\u003eLight block foil packaging\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLight-tight packet helps to prevent against degradation by UV light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"font-weight: 600;\"\u003eOne-time use sachet packets\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures quality and freshness of solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"font-weight: 600;\"\u003eEach sachet marked with lot number and expiration date\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened sachet.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2021-10-29T11:42:48+08:00","created_at":"2021-10-29T11:42:36+08:00","vendor":"CityFarm Malaysia - The Urban Farming Expert","type":"","tags":[],"price":800,"price_min":800,"price_max":800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40949612740799,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hanna Instruments General Purpose Cleaning Solution 20 mL Sachet - HI700601P","public_title":null,"options":["Default Title"],"price":800,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cityfarm.my\/cdn\/shop\/products\/LazadaproductTemplate-2021-10-29T114212.248.jpg?v=1635478958"],"featured_image":"\/\/cityfarm.my\/cdn\/shop\/products\/LazadaproductTemplate-2021-10-29T114212.248.jpg?v=1635478958","options":["Title"],"media":[{"alt":null,"id":23127204823231,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1920,"width":1920,"src":"\/\/cityfarm.my\/cdn\/shop\/products\/LazadaproductTemplate-2021-10-29T114212.248.jpg?v=1635478958"},"aspect_ratio":1.0,"height":1920,"media_type":"image","src":"\/\/cityfarm.my\/cdn\/shop\/products\/LazadaproductTemplate-2021-10-29T114212.248.jpg?v=1635478958","width":1920}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe HI700601P is a highly effective cleaning solution that is formulated for pH electrodes that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna's cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpecially formulated for cleaning electrodes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConvenient, one-time use sachets ensure freshness of solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-controller=\"quantity\"\u003e \u003c\/p\u003e\n\u003cp data-controller=\"quantity\"\u003eThe most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.\u003c\/p\u003e\n\u003cp\u003eThe Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it’s designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI700601P is a cleaning solution made to clean pH electrodes used in a variety of applications.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"font-weight: 600;\"\u003eLight block foil packaging\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLight-tight packet helps to prevent against degradation by UV light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"font-weight: 600;\"\u003eOne-time use sachet packets\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures quality and freshness of solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"font-weight: 600;\"\u003eEach sachet marked with lot number and expiration date\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened sachet.\u003c\/li\u003e\n\u003c\/ul\u003e"}

Hanna Instruments General Purpose Cleaning Solution 20 mL Sachet - HI700601P

Product Description

The HI700601P is a highly effective cleaning solution that is formulated for pH electrodes that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna's cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.

  • Specially formulated for cleaning electrodes
  • Convenient, one-time use sachets ensure freshness of solution

 

The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.

The Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it’s designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI700601P is a cleaning solution made to clean pH electrodes used in a variety of applications.

 

Light block foil packaging

  • Light-tight packet helps to prevent against degradation by UV light

 

One-time use sachet packets

  • Ensures quality and freshness of solution

 

Each sachet marked with lot number and expiration date

  • Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened sachet.
RM8.00
Maximum quantity available reached.